# Motool technology — knowledge base

Last updated: 2026-10-07. Site: https://motooltechnology.com/. Index: https://motooltechnology.com/llms.txt.

## Product range

- 4-Post Car Lift, 11,000 lbs (ASIN B0FGXRYFRK)
- 12,000-lb 2-Post Lift with 2+3 Arms (ASIN B0FRL9BX1V)
- Mid-Rise Scissor Lift 8000lbs KT-X85 (ASIN B0CBKTXZFX)
- 26-Inch Tire Changer & Balancer Combo (ASIN B0CHQ6HPLJ)
- 7700lbs Mid-Rise Scissor Lift (ASIN B0F43N7JN4)
- 11,000 lbs Two-Post Car Lift (ASIN B0CZRQ1LT3)
- Swing Arm Tire Changer & Balancer Combo (ASIN B0DX5G84NB)
- 2.0HP Tire Changer with Bead Blaster (ASIN B0FVXKJ2RZ)

All products: https://motooltechnology.com/

## Product: 4-Post Car Lift, 11,000 lbs

ASIN: B0FGXRYFRK. Details: https://motooltechnology.com/

This four-post lift raises trucks and SUVs to 84.5 inches, supporting up to 11,000 lbs per vehicle. Four mechanical locks combine primary and secondary safety stages to hold the platform steady through oil changes or long-term storage. Release all four with a single lever, no climbing under the frame to check each post. The 110V motor runs on standard shop power; swap to 220V/60Hz/3PH if your garage wiring supports it. Park a full-size pickup overhead and roll a sedan underneath for two-vehicle storage in one bay. Add a caster kit later and reposition the lift without re-anchoring the concrete.

- 11,000 lbs capacity, 84.5-inch max height
- Four mechanical locks, primary + secondary stages
- Single-point manual release lever
- 110V or 220V/60Hz/3PH power options
- Optional caster kit and rolling jacks

## Product: 12,000-lb 2-Post Lift with 2+3 Arms

ASIN: B0FRL9BX1V. Details: https://motooltechnology.com/

The two-post lift raises SUVs and trucks up to 12,000 lbs on a 220V/60Hz/1PH hydraulic system. A third arm pair extends the 2+3 structure, so technicians swing equal-length arms under long-wheelbase trucks. Main columns use 4.7mm Q235B steel, and 6mm-thick lifting arms resist bending after years of daily raises. Rubber pads cushion the door edge each time a vehicle swings onto the arms. U-shaped pads and height extenders seat modified or high-chassis trucks level on an uneven shop floor. The lift climbs to a 70.9-inch max height under a 148.8-inch overall frame. Full-size SUVs clear the frame with room to spare.

- 12,000 lb capacity on 220V/60Hz/1PH power
- 2+3 equal-length arm structure
- 4.7mm Q235B columns, 6mm arms
- 70.9-inch max lift height
- Height extenders and U-shaped pads included

## Product: Mid-Rise Scissor Lift 8000lbs KT-X85

ASIN: B0CBKTXZFX. Details: https://motooltechnology.com/

The KT-X85 lifts a sedan onto its 57-inch platform and reaches 40.15 inches in under a minute. It holds 8,000 lbs and passed 115% dynamic and 150% static loading tests before CE certification. Trigger the electric safety release and the platform drops through a 24V control circuit, not raw hydraulic pressure. Roll the lift to a new bay on its mobile kit, or bolt the base down for fixed-mount duty. A height limit switch cuts power at 40.15 inches, stopping over-travel during long shop shifts.

- 8,000 lbs (3,500 kg) lifting capacity
- CE certified: 115% dynamic, 150% static tested
- Mobile or fixed mount design
- 24V electric safety release system
- Height limit switch cutoff

## Product: 26-Inch Tire Changer & Balancer Combo

ASIN: B0CHQ6HPLJ. Details: https://motooltechnology.com/

Clamp a 26-inch wheel onto the KT835 and the alloy steel jaws bite down without slipping. Carburized to 0.8-1.1mm depth, the jaw face runs hard while the core stays tough. The stainless mounting head passes solution treatment and interface polishing so rims slide on scratch-free. Step on the pull-type pedal and the spade-cover gauge inflates the tire without denting the rim. Run the 120V, 2.0HP motor on pure copper winding and heat clears fast during long shifts. A φ186mm stainless bead breaker cylinder drives the double-side assist arm through stubborn bead seats. The closed body keeps grit and oil off the internal parts, shift after shift.

- Alloy steel jaws carburized to 0.8-1.1mm depth
- Stainless mounting head with polished interface
- 120V, 2.0HP pure-copper-winding motor
- Pull-type pedal-controlled inflation gauge
- φ186mm stainless bead breaker cylinder

## Product: 7700lbs Mid-Rise Scissor Lift

ASIN: B0F43N7JN4. Details: https://motooltechnology.com/

This mid-rise scissor lift raises 7700 lbs to a full 41 inches, clearing space underneath for oil changes and brake jobs. It drops to a 4.3-inch minimum height, low enough to slide under a sedan with ground-effects trim. The pneumatic release locks the platform at the exact working height, so a mechanic sets it once and keeps working. Fold-out drive-up ramps lock into place as a platform extension, long enough for a stretched-cab pickup. Power runs on 110V out of the box, with a 220V option for a dedicated shop circuit.

- 7700 lbs lifting capacity
- Adjustable height, 4.3 to 41 inches
- Pneumatic release for precise height control
- Drive-up ramps lock as platform extension
- Dual voltage: 110V or 220V

## Product: 11,000 lbs Two-Post Car Lift

ASIN: B0CZRQ1LT3. Details: https://motooltechnology.com/

This two-post lift raises vehicles up to 11,000 lbs on a top-level 220V/60Hz/1PH hydraulic system. Dual hydraulic chain-drive cylinders pull both posts together, keeping a loaded pickup level from ramp to full height. The frame passed 115% dynamic loading and 150% static loading capacity tests before it left the factory. Screw-on pads and extension adaptor sets add 100mm of reach, so the arms still reach the frame rails on a full-size crew cab. Shop owners bolt down the LM1100S once and swap between sedans and trucks without changing pads mid-shift.

- 11,000 lbs lifting capacity
- 220V/60Hz/1PH hydraulic power system
- Dual hydraulic chain-drive cylinders
- 115% dynamic / 150% static tested
- 100mm extended reach adaptor sets

## Product: Swing Arm Tire Changer & Balancer Combo

ASIN: B0DX5G84NB. Details: https://motooltechnology.com/

This combo pairs a 2.0HP tire changer with a wheel balancer for 24-inch wheel service. Alloy steel jaws undergo carburization to 0.8-1.1mm depth, giving them a tough core and hardened face. Mount tires with the outside clamp spanning 12 to 20 inches, inside 14 to 24 inches. A stainless mounting head, solution-treated and polished, protects rims under a plastic cover. The 3mm steel body limits vibration through solid welding. An 8mm bottom board and 8mm side board keep the pressure sensor stable during high-speed spins. Shop owners inflate tires hands-free through the pedal-controlled gauge.

- Carburized alloy steel jaws, 0.8-1.1mm depth
- Stainless, solution-treated mounting head
- 12-20in outside / 14-24in inside clamp
- 3mm steel body, solid welding
- Pedal-controlled inflation gauge

## Product: 2.0HP Tire Changer with Bead Blaster

ASIN: B0FVXKJ2RZ. Details: https://motooltechnology.com/

This 2.0HP tire changer clamps wheels from 12 to 22 inches outside and 14 to 24 inches inside, so one turntable handles trucks and passenger cars. The Bead Blaster fires a burst of air that seats a stubborn bead in seconds, so techs skip the pry bar. Double Assist arms pull the tire off the rim together and cut the muscle work on wide, stiff sidewalls. Heavy-duty jaws and a reinforced bead breaker take daily use in high-volume shops without cracking.

- Outside clamp 12"-22", inside 14"-24"
- Integrated Bead Blaster for instant bead seating
- Double Assist reduces operator strain
- Heavy-duty jaws built for daily commercial use
- Boosts throughput in high-volume shops